This Roselli Kiln Stilt includes 3 pins which are spaced ~3.5cm apart.
No. Pins: 3
Pin Spacing: ~3.5cm
Overall size: ~5.2 x 5.2cm x 2cm (including 7mm pins)
Roselli Stilts are fireable to Cone 10. And although fireable to cone 10, Roselli stilt pins will become increasingly flexible as weight and temperature increases.
Make sure to select the right stilt for your project, considering the weight and firing temperature of the object being fired and ensure your stilt is roughly the same size as the object being fired.
Tips:
- Roselli stilts can last for a large number of repeat firings if used in the appropriate manner. As long as stilts are not overloaded or used improperly, they will survive repeat firings without issue.
- Heavy weight at higher firing temperatures will degrade the product faster than lighter weight at lower temps. Proper stilt choice is key to product longevity.
- Always use a single stilt roughly the same size as the object being fired, over using several smaller stilts to do the same job as the pins in smaller stilts aren’t designed to carry the weight of a heavy item.
*Manufacturing Variance ±1mm-3mm
The delivery time was great. I am a bit disappointed that some of the pins are bending over during the firing. I am not sure if this was the cause for the pieces of pottery to move, causing damage to them.
From: fernanda parodi costa
|
Date: 15/02/2024
Was this review helpful?
/
(0/0)
Great for small jewlery.
From: Evelyn Davies
|
Date: 23/06/2023
Was this review helpful?
/
(0/0)
Works well arrived in good time
From: Sally Matthews
|
Date: 09/10/2022
Was this review helpful?
/
(0/0)
Works well arrived in good time
From: Sally Matthews
|
Date: 08/10/2022
Was this review helpful?
/
(0/0)
