Mayco SG501 Sculpting Medium 118ml

Mayco SG501 Sculpting Medium 118ml

Mayco SG-501 Sculpting Medium is a low-fire dimensional glaze that produces a white raised surface. Add structured design elements and texture to your work by combining Sculpting Medium with stencils, lace and stamps.

Size: 118ml

Colour: White/Translucent

Firing Range: Cone 06 – Cone 6

Finish: Cone 06: Produces a white, raised surface. Cone 6: Semi-Transparent. Medium glosses and turns.

General Use:

Mix well. Apply with a brush, palette knife or squeegee directly on bisque or on top of an unfired glaze. Sculpting Medium has the viscosity of condensed milk and it can be brushed on or applied with a sponge.  The recommended application thickness is 1/16 to ⅛”. Sculpting Medium is quick drying. If desired, apply Stroke & Coat over Sculpting Medium to add colour. Fire to shelf cone 05/06 (1031°C – 999°C); it will not perform at higher temperatures. The fired finish can be coarse and have rough edges; a layer of clear glaze (or a coloured glaze) will smooth these sharp edges.

Tips:

• For use with a stencil, hold a stencil onto your piece and brush Sculpting Medium over the stencil. Allow the Medium to set up a bit (until the wet look is gone) and then remove the stencil.

Food Safety:  Sculpting Medium has been certified as Non-Toxic, safe for use by artists of all ages when used according to manufacturer’s directions. Recommended for ornamental use only due to surface characteristics.